Welcome to Guangzhou SUNINC Machinery Manufacturing Co., Ltd.

Chinese | EN

020-31528613

广州日畅机械制造有限公司
SUNINC
Your Current Location ：Home » News » Common problem  » Reasons and Countermeasures for high noise during operation

Reasons and Countermeasures for high noise during operation

Source： Time：2019-01-10 15:39:48 views：

Reason: 1. The belt tension is too large. 2. Parallel misalignment of two axes. 3. The width of the belt is larger than the diameter of the pulley. 4. Overload. 5. Bad meshing between belt and pulley. Countermeasures: 1. Reduce the tension force (no teeth skipping is allowed) 2. Adjust the positioning of the pulley. 3. Inspection design. 4. Inspection design. 5. Check the belt and pulley.

Reason:
1. The belt tension is too large.
2. Parallel misalignment of two axes.
3. The width of the belt is larger than the diameter of the pulley.
4. Overload.
5. Bad meshing between belt and pulley.
Countermeasures:
1. Reduce the tension force (no teeth skipping is allowed)
2. Adjust the positioning of the pulley.
3. Inspection design.
4. Inspection design.
5. Check the belt and pulley.





Previous：Causes and Countermeasures of partial fracture of tension body

next：Causes and Countermeasures of wear of pulley teeth

Return

Address: Changhong West Road, Changhong First Industrial Zone, Jiahe, Baiyun District, Guangzhou             Tel：020-31528613
Phone：18903060233
Email：lrj@suninc.com.cn
Wechat  Official Acconuts
Guangzhou SUNINC Machinery Manufacturing Co., Ltd.： Copyright   Record No: Guangdong ICP Record No. 19036245-3